Yokogawa CP461 CPU Module

Description

Displays a menu for turning analog signal input channels on and off, for expanding and reducing the vertical axis, and for setting the vertical position, coupling, probe type, offset voltage, bandwidth limit, linear scaling, and waveform labels. Also, press any of these keys to select which channel the SCALE or POSITION knob will control. Channel keys illuminate when the corresponding channel displays are on. And The LED between the SCALE and POSITION knobs illuminates in the color assigned to the selected channel (the color around the CH key). Use the LOGIC key to configure the logic channel. At any given time, you can either use the CH4 analog signal input channel or the logic channel. If you press LOGIC, the logic channel is enabled. If you press CH4, the CH4 analog signal input channel is enabled. The key that corresponds to the enabled channel illuminates. POSITION Knob Use this knob to change the center position when you change the voltage range. Before you turn this knob, select the source waveform by pressing a key from CH1 to CH4 (or LOGIC). This knob has a push switch. You can press the knob to reset the position to 0.0 divisions. You can also use this knob on the logic channel. SCALE Knob Use this knob to set the vertical scale. Before you turn this knob, select the target waveform by pressing a key from CH1 to CH4 (or LOGIC). If you change the scale while signal acquisition is stopped, the waveform is expanded or reduced vertically. The setting actually takes effect when you restart signal acquisition. This knob has a push switch. You can press the knob to switch the resolution. If you press the knob so that Fine illuminates, the resolution is set to fine mode. If the target signal is a logic signal, you can expand the waveform by three vertical levels.

Yokogawa Main Products

More Products

Delivery Time

We accept Westem Union,T/T.

We cooperate with T/T, Western Union. You can receive the goods within 3 to 5 days.

About us

Our company main supply PLC and DCS Module, Power Supply Module, Input Module, Output Module, I/O Module, Rack, Panels, Proximitor Sensor, Programming Cable,Terminal Blocks et.