Siemens Simatic 6DD1842-0AA0 Module

Description

Since replacing the PLC CPU also requires changing the PLC entire back plane, any modules that were previously used in the S5 rack must also be replaced. This includes all I/O modules, function modules, and communication modules. c. Interface Modules in Local Expansion Racks In legacy S5 applications, there may have been more than one tier of modules (local expansion racks) connected to the main rack. In these cases, all the modules will have to be replaced with S7 modules. If using the S7-300 family, a similar architecture can be achieved using the IM360, IM361, and IM365 modules to expand the main rack. If using the S7-400 family, the IM460 and IM461 are used. Another possible thing to consider is to move the modules to a remote rack and use the IM463 interface as shown below. This might be cost effective since you could reuse the S5 I/O modules. The following sketch shows remote racks of S5 type connected to a S7 main rack through the IM463. Note this could be a possible setup for both intermediate performance and high performance systems. The IM463 interface is very easy to program. Very similar to a DP coupler in that it has S5 addresses assigned on one side and S7 addresses assigned on the other side. Experience has proven that the correct length of the 721 cable is important. There is a switch on the front of the IM463 module which must be set to the length of the 721 cable. There are 4 choices for length. Again, the other way to migrate the system would be to convert the remote racks and all of the modules to ET200M. It may be wise to make several estimates of hardware conversions, and choose the most cost effective approach. 

Strong PLC Parts Series:

ABB PLC

DCS 800xA System/S800 I/O System, ADCS 800xA System/S900 I/O Series, Advant OCS/800XA ,  H&B Freelance 2000 , BAILEY-INFI90/Bailey Net 90,  DSQC Robot Parts,  PLC cards and boards

Honeywell DCS

Experion PKS ( C200 ,  C300 ), FSC

Bently Nevada TSI

Bently Nevada  3500 Series Monitor system, Bently Nevada  3300 Series Monitor system

Modules/Chassis/I/O Module,  Power Supply Module/Proximitor Sensor/ Programming Cable

Fanuc PLC

IC695, IC698,  IC694, IC697,  IC754,  IC752 QuickPanel, IC660,  IC600   Seriex Six,  IC610, IC620  Series One, IC692  Series 90-20,  IS200, IS215, DS200, DS3000/3800

Siemens Main Products

More Products

FAQ

1.Is the part new? 

   Yes, 100% Original brand new

2.How is the package?

   Original factory seal packed

3.What is the lead time?

   In stock: 1-3 working days

4.What is the MOQ: 

   1pcs

5.What is the payment term:

   T/T 

6.What is the warranty time?

   One year