ROCKWELL Allen-Bradley 1769-OF8C

1769-OF8C     1769-OF8C     1769-OF8C

1769 Compact I/O Modules Specifications

Before You Begin

Consider the following when planning your CompactLogix system:

• The CompactLogix controller is always the leftmost module in the system.

• The controller must be located within four modules of the system power supply. Some I/O modules may be located up to eight modules away from the power supply. See the documentation for your 1769 I/O modules for details.

• The 1769-L32E and 1769-L35E controllers support as many as 16 I/O modules in a maximum of 3 I/O banks with 2 expansion cables.

• Each I/O bank requires its own power supply.

• Only one controller can be used in a CompactLogix system.

• A 1769-ECR right end cap or 1769-ECL left end cap is required to terminate the end of the communication bus.

Configuring the 1769-IR6 in a MicroLogix 1500 System

This example takes you through configuring your 1769-IR6 RTD/resistance input module with RSLogix 500 programming software, assumes your module is installed as expansion I/O in a MicroLogix 1500 system, and that RSLinx™ is properly configured and a communications link has been established between the MicroLogix processor and RSLogix 500

Allen Bradley Products