HONEYWELL 51405045-175 Module

Description

A maximum of 40 logical IOPs can be configured per PM, APM, HPM, and EHPM. A “logical” IOP consists of either a single IOP or a redundant IOP pair). Typical PM, APM, HPM, and EHPM configurations may vary, but they generally consist of up to three cardfiles plus a power supply system. Each cardfile row may contain up to 15 module slots. (Refer to Figure 4.) When options such as I/O redundancy and/or remote I/O are used, configurations with up to 8 “logical” card files can be provided. One or two card files contain the PM, APM, HPM, or EPM Module(s). All remaining card file slots can be filled with any combination of I/O Processors. Note that 7-slot files which are used for the HPM/EHPM (i.e., not for PM or APM) can also be filled with IOPs. This "IOP only" configuration can be used to provide I/O for PMs and APMs as well. With 7-slot HPM/EHPM files, a single cabinet side can hold up to 40 I/O Processors along with redundant High-Performance Process Manager Modules or redundant Ethernet High-Performance Process Manager Modules. Figure 4 shows typical cabinet layouts with redundant EHPMs/HPMs, APMs, and PMs. All connections to and from the process are made to Field Termination Assemblies (FTAs). Compressiontype termination blocks (that can accept wire sizes as large as 14 AWG or ~1.6 mm) are available for all FTAs. Screw-type termination's can also be provided for most FTAs as shown in Table 1 in the “Specifications” section. The FTAs are connected to the I/O processors by cables that can be up to 50 meters in length. Three sizes of FTAs are used as shown in this table. Twenty-four Vdc transmitter and digital inputs sense power connections are provided through the standard FTA cable.

Honeywell Main Products

Strong PLC Parts Series:

ABB PLC

DCS 800xA System/S800 I/O System, ADCS 800xA System/S900 I/O Series, Advant OCS/800XA ,  H&B Freelance 2000 , BAILEY-INFI90/Bailey Net 90,  DSQC Robot Parts,  PLC cards and boards

Honeywell DCS

Experion PKS ( C200 ,  C300 ), FSC

Bently Nevada TSI

Bently Nevada  3500 Series Monitor system, Bently Nevada  3300 Series Monitor system

Modules/Chassis/I/O Module,  Power Supply Module/Proximitor Sensor/ Programming Cable

Fanuc PLC

IC695, IC698,  IC694, IC697,  IC754,  IC752 QuickPanel, IC660,  IC600  Seriex Six,  IC610, IC620  Series One, IC692  Series 90-20,  IS200, IS215, DS200, DS3000/3800

Invensys Foxboro DCS

Foxboro I/A Series System Module.Foxboro CP /Foxboro FBM , Foxboro Termination Assembly Module, Foxboro Baseplate

InvensysTriconex DCS

Triconex Rack, Triconex Power Module, Processor Module,  Input Module, Output Module, Tricon Communication Module TCM, Triconex Terminal Block, Triconex Cable

Yokogawa PLC

Yokogawa CENTUM CS 3000 R3/Yokogawa CPU Module/Power Supply Module/ I/O Module/Cards

More Products 

Feel free to contact us

New Good Price!

If you have any questions or need any help, please contact me DIRECTLY. I will do what I can to help you.

We believe our products are excellent. We trust you will be satisfied with your purchase.

When you are satisfied with our products and services, please give us positive feedback.

If there is a problem, please contact us immediately through an email request.