GENERAL ELECTRIC BENTLY NEVADA TK3-2E

Bently Nevada Tk3-2e Vibration Calibrator Datasheet

Description

 The TK3-2 Calibration Instrument simulates shaft vibration and position for calibrating Bently Nevada monitors. It verifies the operating condition of the monitor readouts as well as the condition of the proximity transducer system. A properly calibrated system means that the monitor readings and transducer inputs are accurate.

Specifications

Inputs

Power

Electric: 95 - 125 Vac, 50/60 Hz, 1A minimum.

190 - 250 Vac, 50/60 Hz, 1A minimum.

Air: 90 psi (6.2 bar) maximum.

Wobulator Range

Vibration Amplitude

Range:

50 µm to 254 µm (2 to 10 mils) peak-to-peak.

Maximum Speed

Electric: 0 to 10,000 cpm ±2,500 cpm.

Air: 0 to 5,000 cpm ±1,000 cpm.

Specifications

Inputs

Power

Consumption

5.0 watts typical with

ModbusRS232/ RS422 I/O Module

5.6 watts typical with Modbus

RS485 I/O Module

Data Types:

Collects data from other modules

in the rack, such as current

proportional values with time

stamp, module statuses, and

current alarm statuses, via a high

speed internal network.

Exact data types returned depend

on module type and channel

configuration.

Update Time: The data collection

rate depends on rack

configuration but will not exceed

1 second for all modules in the

3500 rack.

Bently Nevada 3500 Vibration Monitoring System

128275-01F    122407-01    

128276-01F    124534-01    

129974-01    125489-01    

131178-01    125680-01    

133292-01    125712-01    

133300-01    125720-01    

133323-01    125736-01    

133388-01    125740-01    

133388-02    125744-02    

133396-01    125760-01    

133442-01    125768-01    

133819-01    125800-01    

133827-01    125840-01    

135137-01    125840-02    

135305-01    126599-01