GE Fanuc IC200ALG260B Module

Description

The IC200ALG260 is an 8 channel, 12 Bit, Voltage/Current Analog Input Module from the GE Fanuc Versamax series with eight voltage and current inputs. The analog input module has eight isolated inputs as part of an intelligent module that can accept input signals from up to eight separate analog devices. This module also provides input data with 16 bits of resolution for these devices. In current mode, it may be necessary to supply a separate power supply for isolated inputs. However, additional software configurable parts include per channel selection of 4-20mA current or +/- 10 V voltage inputs, selectable input filter, and pre-channel selection of default values and under/over range levels.

The IC200ALG260 offers eight words of analog input data and reports the under and over range, open wire, loss of power, non-volatile memory fault, and high or low alarm diagnostics. Each of these allows the user to know if a problem has occurred and correct that issue quickly. Additionally, LED indicators are standard for this module.\
To install the IC200ALG260, a 24 V power supply must connect to A17 and 18 to function. Current inputs are applied with positive current flow with both negative terminals of the channel connected for top accuracy. If the unit is installed on a terminal style I/O carrier or a compact of the same style, then the cable shield can be directly connected to the carrier in these specific cases. This module is compatible with PLC CPU firmware version 1.20 or later.

GE Fanuc Products

Strong PLC Parts Series:

ABB PLC

DCS 800xA System/S800 I/O System, ADCS 800xA System/S900 I/O Series, Advant OCS/800XA ,  H&B Freelance 2000 , BAILEY-INFI90/Bailey Net 90,  DSQC Robot Parts,  PLC cards and boards

Honeywell DCS

Experion PKS ( C200 ,  C300 ), FSC

Bently Nevada TSI

Bently Nevada  3500 Series Monitor system, Bently Nevada  3300 Series Monitor system

Modules/Chassis/I/O Module,  Power Supply Module/Proximitor Sensor/ Programming Cable

Fanuc PLC

IC695, IC698,  IC694, IC697,  IC754,  IC752 QuickPanel, IC660,  IC600   Seriex Six,  IC610, IC620  Series One, IC692  Series 90-20,  IS200, IS215, DS200, DS3000/3800

Invensys Foxboro DCS

Foxboro I/A Series System Module.Foxboro CP /Foxboro FBM , Foxboro Termination Assembly Module, Foxboro Baseplate

InvensysTriconex DCS

Triconex Rack, Triconex Power Module, Processor Module,  Input Module, Output Module, Tricon Communication Module TCM, Triconex Terminal Block, Triconex Cable

Yokogawa PLC

Yokogawa CENTUM CS 3000 R3/Yokogawa CPU Module/Power Supply Module/ I/O Module/Cards

More Products 

About us

Our company main supply PLC and DCS Module, Power Supply Module, Input Module, Output Module, I/O Module, Rack, Panels, Proximitor Sensor, Programming Cable,Terminal Blocks etc. Hot brands：Bently  Nevada, Honeywell, ABB, Allen Bradley,GE Fanuc,Invensys…