GE Fanuc DS200LDCCH1AGA Module

Description

General Electric developed the DS200LDCCH1AGA card to operate as a drive control and local area network (LAN) communications board. This card is housed in the Mark V series of replacement drive boards compatible with GE brand DIRECTO-MATIC 2000 drives and exciters. When installed in a drive the board provides an array of drive and I/O control functions for the drive.

The DS200LDCCH1AGA communication card houses four microprocessors onboard. A LAN control processor (LCP) is available to accept five different bus types fed to the drive. A drive control processor (DCP) is also available to process analog and digital I/O conversions. The DCP is also capable of controlling and converting peripheral I/O devices such as encoders and timers. A motor control processor (MCP) is provided to process digital I/O sent to the drive. Should calculations require extra processing power the DCP cannot provide, the co-motor processor (CMP) will provide the additional power needed to complete these functions. The board is completed with an alphanumeric keyboard used for system programming and diagnostic purposes.

When shipped from AX Control the DS200LDCCH1AGA board will be wrapped in a protective, static resistant plastic bag. Before removing the device from the shipping container, please review the installation parameters provided by the card’s manufacturer. Both the series manual and the board’s corresponding datasheet contain a complete wiring guide for this communications card. All members of the Mark V series were provided with technical support by General Electric.

GE Fanuc Products

Strong PLC Parts Series:

ABB PLC

DCS 800xA System/S800 I/O System, ADCS 800xA System/S900 I/O Series, Advant OCS/800XA ,  H&B Freelance 2000 , BAILEY-INFI90/Bailey Net 90,  DSQC Robot Parts,  PLC cards and boards

Honeywell DCS

Experion PKS ( C200 ,  C300 ), FSC

Bently Nevada TSI

Bently Nevada  3500 Series Monitor system, Bently Nevada  3300 Series Monitor system

Modules/Chassis/I/O Module,  Power Supply Module/Proximitor Sensor/ Programming Cable

Fanuc PLC

IC695, IC698,  IC694, IC697,  IC754,  IC752 QuickPanel, IC660,  IC600   Seriex Six,  IC610, IC620  Series One, IC692  Series 90-20,  IS200, IS215, DS200, DS3000/3800

Invensys Foxboro DCS

Foxboro I/A Series System Module.Foxboro CP /Foxboro FBM , Foxboro Termination Assembly Module, Foxboro Baseplate

InvensysTriconex DCS

Triconex Rack, Triconex Power Module, Processor Module,  Input Module, Output Module, Tricon Communication Module TCM, Triconex Terminal Block, Triconex Cable

Yokogawa PLC

Yokogawa CENTUM CS 3000 R3/Yokogawa CPU Module/Power Supply Module/ I/O Module/Cards

More Products 

About us

Our company main supply PLC and DCS Module, Power Supply Module, Input Module, Output Module, I/O Module, Rack, Panels, Proximitor Sensor, Programming Cable,Terminal Blocks etc. Hot brands：Bently  Nevada, Honeywell, ABB, Allen Bradley,GE Fanuc,Invensys…