Allen Bradley 1606-XLS240-UPS Bulletin 1606 Switched Mode Power Supplies

Technical Specifications for Rockwell Automation 1606-XLS240-UPS:

Input:

• Nominal Voltage: 24V DC

• Voltage Ranges:

• Continuous Operation: 22.5 to 30V DC (see Fig. 5-1)

• Temporarily Allowed: 30 to 35V DC (no damage to the DC-UPS)

• Absolute Maximum: 35V DC (no damage to the DC-UPS)

• Buffer Mode Activation: 0 to 22.5V DC (if the input was above the turn-on level and all buffer conditions are fulfilled)

• Allowed Input Voltage Ripple:

• <400Hz Bandwidth: Max. 1.5Vpp

• 400Hz to 1kHz Bandwidth: Max. 1Vpp

• Allowed Voltage Between Input and Earth (Ground): Max. 60V DC or 42.4V AC

• Turn-on Voltage:

• Typical: 22.8V DC (the output does not switch on if the input voltage does not exceed this level)

• Maximum: 23V DC

• Input Current:

• Internal Current Consumption (Typical): 120mA

• Battery Charging (Typical): 1.1A (constant current mode at 24V input, see Fig. 8-2)

Output in Normal Mode:

• Nominal Voltage: 24V DC (follows the input voltage reduced by the input to output voltage drop)

• Voltage Drop Between Input and Output:

• Maximum: 0.3V at 10A output current (see Fig. 6-1 for typical values)

• Maximum: 0.45V at 15A output current (see Fig. 6-1 for typical values)

• Ripple and Noise Voltage: Max. 20mVpp (20Hz to 20MHz, 50 Ohm)

• Nominal Current: 15A (continuously allowed)

• Nominal Power: 360W (continuously allowed)

• Short-Circuit Current:

• Minimum: 17.9A (load impedance 100mOhm, see Fig. 6-2 for typical values)

• Maximum: 21A (load impedance 100mOhm, see Fig. 6-2 for typical values)

Environmental:

• Operating Temperature Range: -25°C to +70°C

• Derating: 0.43A/°C from +60°C to +70°C (normal mode)

• Dimensions: 49mm (W) x 124mm (H) x 117mm (D)

• Buffer Time (at 10A):

• Typical: 6 minutes 45 seconds with a 7Ah battery module

• Typical: 55 minutes with a 26Ah battery module